China lateral load resistant compact guide cylinder Manufacturer, Supplier, Factory

General Introduction GW1 series outdoor high voltage disconnect switch is the high voltage switch equipment of composite structure, is suitable for outdoor 12kV 、24KV 、40.5KV. line net with voltage and no load, to make opening and close. With CS□type manpower operate machinery, can avoid earth line with power and composite flash-locks etc wrong operate. The operator is no need to put another earth line. Pollution-proof type isolate switch satisfy customer in filthy conduction area. It can solve the pollution of shed when it is working. The GW1 series outdoor high voltage isolator switch is designed for reliable and durable performance in high voltage power distribution systems. Available in 12KV, 24KV, and 40.5KV, and current ratings from 630A to 1250A, these switches are built to withstand harsh environmental conditions, including high pollution and severe weather. With compliance to international standards IEC62271-103 and DL/T 486-2010, they ensure safety and operational integrity. GW1 outdoor AC high voltage isolating switch is suitable for installation on the line of outdoor high voltage power distribution equipment, which is used to cut off the line and convert the line when the line has voltage and no load. User-friendly installation and maintenance are facilitated by manual or electric operation mechanisms. The GW1 series is suitable for various environments, including high altitudes and extreme temperatures, making it an ideal choice for secure electrical isolation in outdoor systems.

SOLH CJ1 ultra-miniature pin pneumatic cylinder is interchangeable with equivalent SMC models, offered in φ2.5 and φ4 bore sizes. φ2.5 is single acting spring return only, while φ4 supports both single acting and double acting versions. Slim and ultra-lightweight (2~3.5g), it features no built-in cushion for rapid response. The rod-side air port can be rotated ±90° to facilitate tubing layout. External threads on both ends enable direct axial fixing without extra brackets. It delivers thrust ranging from 0.64 to 6.3 N at 0.5 MPa, suitable for micro loads below 100 g to avoid impact damage to delicate tiny workpieces. NBR seals support oil-free operation for clean environment. Widely applied in short-stroke high-frequency push-pull tasks including 3C button durability testing, chip ejection, micro component positioning, precision instrument fine-tuning and miniature actuators for medical devices. A thrust safety factor of at least 50% is recommended during selection.

Switchgear Button: Product Details and Applications The Switchgear Button is a crucial component in modern electrical switchgear systems, designed for user-friendly operation and enhanced safety. These buttons are typically made from high-quality, durable materials such as thermoplastic or metal to withstand harsh environments and frequent use. They come in various shapes, sizes, and colors to ensure clear visibility and accessibility, accommodating diverse operational needs.

SOLH MRHQ vane-type integrated rotary gripper is fully interchangeable with equivalent SMC models. It integrates a vane rotary module and parallel air gripper into a single actuator, replacing split combination of rotary table plus separate finger cylinder. Overall length is shortened by roughly 20% and tubing drag interference during rotation is eliminated. Bore sizes cover 10/16/20/25 mm with standard 90° and 180° rotation versions. End stop screws enable ±10° total angular fine adjustment. The double-acting parallel jaw achieves repeat positioning accuracy of ±0.01 mm. Five mounting surfaces together with locating bosses and pin holes enable fast centering and multi-orientation assembly. Built-in magnetic rings support up to four M9 series reed switches to detect both rotary limits and jaw open/closed status for full PLC interlock control. Adopting oil-free self-lubricating structure, it is widely used for workpiece gripping, flipping and direction conversion in confined-space 3C electronics and packaging automation lines for light & medium loads from 0.1 to 5 kg. A minimum 30% safety margin is required during load selection.

SOLH XSA normally closed solenoid valve is specially designed for ultra-high vacuum circuits for air and inert gas, supporting ultimate vacuum down to 1×10⁻⁶ Pa with ultra-low internal and external leakage rates. Its built-in internal spring minimizes friction and particle generation to meet strict cleanroom standards. Featuring lower coil power consumption and lighter body for easy compact integration, it provides multiple connection options including face seal, ferrule and internal Rc/NPT thread, with complete mainstream voltages and wiring terminals. Certified CE & RoHS, it serves as reliable core switching component for semiconductor, PV, LCD, medical sterilization, food vacuum packaging and laboratory ultra-high vacuum testing equipment.

Circuit breaker drive shaft Product Background: Richge is a manufacturer of Circuit Breaker Drive Shafts in China, specializing in producing high-quality drive shafts essential for the operation of circuit breakers within electrical systems. Our drive shafts are meticulously engineered to ensure reliable performance, durability, and precision, supporting the efficient functioning of circuit breakers.