China industrial pressing lifting transfer guide cylinder Manufacturer, Supplier, Factory

SOLH HFZ linear guide parallel pneumatic gripper is directly interchangeable with SMC MHZ2 series. It adopts dual-piston rack & pinion synchronous transmission integrated with ball linear guide for high rigidity and excellent offset load resistance. Three actuation variants are available: standard double-acting HFZ; single-acting normally closed HFSZ (spring holds workpiece when air cuts off); single-acting normally open HFTZ (spring releases workpiece upon air loss). Bore sizes range from 6 to 40 mm with repeat positioning accuracy ±0.01~±0.02 mm. Multiple mounting options include bottom tapping, side mounting and through-hole N type. Dual-side sensor grooves and built-in magnetic rings support M9 series magnetic switches for open/closed feedback. Suitable for external clamping and internal expanding gripping. Optional accessories include dust covers, high-temperature seals and NSF-H1 food-grade grease. Effective clamping force decreases with extended jaw overhang; a safety factor ≥1.5 is required during load calculation. Widely deployed on robot end effectors, 3C electronics, precision hardware, injection molding and packaging automation precision gripping stations, especially for applications requiring power-off safety hold or release and working conditions with lateral offset loads.

The indoor withdrawable vacuum circuit breakers are suitable for three-phase AC power systems with rated voltages up to 12~24kV and frequency 50/60Hz. They are widely used in power plants, substations, petrochemicals, metallurgy, manufacturing and other industries, airports, residential areas,... VSG-12 Indoor High Voltage Vacuum Circuit Breaker(abbr.: circuit breaker) is three-phrase A.C. 50Hz indoor of power supply distribution equipped with the rated voltage 12 KV. This product is in accordance with GB1984-2003( high voltage A.C. circuit breaker),JB3855-1996 (3.6-4.5KV indoor A.C. high voltage circuit breaker), DL403-2000(technical conditions for ordering of 12-40.5KV high voltage vacuum circuit breaker) and IEC standard 62271-100:2001( high volage A.C. Circuit breaker). It can be used for protecting and controlling equipment in the grid equipment and the dynamic design of industrial and mining enterprise .It is suitable for switching load and frequent operation with different property and with the capability of many times operations of breaking short-circuit current.

Switchgear Copper Connector Bar – Product Details and Applications The Switchgear Copper Connector Bar is a critical component used in electrical switchgear systems, ensuring the efficient and reliable flow of electrical current between different conductors. Made from high-quality copper, this connector bar offers superior electrical conductivity and low resistivity, minimizing energy loss during power transmission. The copper material also provides excellent thermal performance, which is crucial for high-current applications. Additionally, the connector bar is often coated with a protective layer such as tin or silver plating to enhance corrosion resistance, ensuring long-term durability in harsh operating environments. These bars come in various shapes and dimensions, including flat bars, U-shaped, and T-shaped designs, to accommodate different connection needs in switchgear panels. They are customizable to match specific system layouts, with pre-drilled holes or slots for easy mounting. Some models may feature insulation covers to enhance safety, especially in medium- and high-voltage switchgear systems.

SOLH HRQ dual piston rack & pinion rotary cylinder includes micro sizes HRQ2/3/7 and medium-to-large HRQ10~HRQ200 with infinitely adjustable swing angle 0~190°. It outputs higher torque and stronger bending/radial load capacity than vane rotary actuators. Three configurations are available: basic mechanical stop buffer (low-cost for light low-speed duty), -A integrated hydraulic shock absorber (high-speed heavy load precise stopping), and -A(S) hydraulic version with stainless steel end caps for humid & slightly corrosive environments. The rotary table features central hollow through hole for tubing and wiring, and side sensor slots compatible with universal magnetic reed switches. Micro models adopt bottom mounting holes while medium/large sizes provide multi-side mounting taps for flexible layout. Pre-filled long-life grease enables lubrication-free operation. Selection requires simultaneous verification of torque, radial/axial load and bending moment. Widely used for rotary indexing in automatic assembly, material sorting, packaging capping and jig turnover stations.

FLN36-40.5D/T630 indoor sulfur hexafluoride (SF6) load switch and FLN36-40.5DR/125 load switch fuse combination are suitable for power stations and industrial electrical equipment with three-phase AC 50/60Hz ring network or terminal power supply. They are used as load control line protection for power systems. The load switch divides and closes load current, closed-loop current, no-load transformer and cable charging current; Combination electrical appliances can break any current under rated short-circuit current and are suitable for electrical complete sets of equipment such as ring main units and box type substations. FLN36-40.5 load break switch and FLN -40.5D load break switch plus fuse combination, can be used to protect  and control the electric equipments for power supply and transformer substations, which is especially suitable  for ring net cabinet, cable branch cabinet and distribution switching substation.

GN19-12 Indoor High Voltage Disconnect Switch GN19-12 series indoor high voltage disconnect switch belong to high voltage switch equipments, applies to power system of rated voltage 12KV, AC 50Hz and less than it system, it is equipped with CS6-1 manual operating mechanism and is used to break and make circuit under no-load but with voltage. There are additional pollution abatement type, high altitude type and electrified display. The role of the disconnect switch is to disconnect the circuit without load current. So that the equipment to be serviced and the power supply has a clear disconnection point to ensure the safety of maintenance personnel, isolation switch without special interrupting device can not cut off the load current and short-circuit current, so the circuit must be in the circuit breaker to break the circuit before you can operate the isolation switch.