Ningbo Richge Technology Co., Ltd.
Ningbo Richge Technology Co., Ltd.
Products

China MNS3.0 bushing plate assembly Manufacturer, Supplier, Factory

Our commission is to serve our buyers and purchasers with most effective good quality and aggressive portable digital goods for MNS3.0 bushing plate assembly, MNS3.0 Low Voltage Switchgear Accessories, Switchgear Bushing Plate, Electrical Bus Bushing Plate, ABB MNS3.0 bushing plate, We welcome new and outdated prospects from all walks of lifetime to get in touch with us for foreseeable future small business interactions and mutual achievement!
MNS3.0 bushing plate assembly, We aspire to meet the demands of our customers globally. Our range of solutions and services is continuously expanding to meet customers' requirements. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!

Hot Products

  • HFP Series Mechanical Parallel Style

    HFP Series Mechanical Parallel Style

    SOLH HFP economical lever-type parallel pneumatic gripper adopts mechanical lever linkage transmission as a cost-effective lightweight gripping solution. Bore sizes cover 10/16/20/25/32 mm. Jaws close when piston extends and open on retraction; clamping force is 20%~30% higher than opening force for reliable workpiece holding. Mounting holes are available on three faces: side, bottom and rear. Built-in permanent magnets work with CS1-G magnetic switches for open/closed status feedback. Metal friction isolation plates reduce abrasion to adapt to high-cycle continuous operation. Positioned as an economical alternative to linear-guide grippers such as HFZ and MHZ2, it suits cost-sensitive light & medium load applications. Periodic grease maintenance on lever joints is recommended. Widely used for high-frequency handling of 3C plastic parts, miniature stamped hardware and small packaging components. Not recommended for conditions with persistent heavy offset loads or ultra-high precision assembly requirements.
  • KQ2C Push Fit Female End Cap Plastic

    KQ2C Push Fit Female End Cap Plastic

    KQ2C push-in caps are dedicated tube plugs for SOLH KQ2 one-touch pneumatic fittings, engineered as drop-in alternatives to SMC KQ2C. Featuring tool-free insertion, the caps lock into unused push-in ports to achieve reliable sealing for both vacuum and compressed air circuits. Constructed with PBT body and NBR sealing ring, they cover sizes Φ2 through Φ16. Widely used for equipment commissioning, manifold spare port closure and temporary circuit isolation in automation machinery, valve islands and vacuum systems.
  • Ground Switch Mechanism for Switchgear

    Ground Switch Mechanism for Switchgear

    The Ground Switch Mechanism for Switchgear is a safety mechanism designed to prevent the accidental operation of a ground switch in electrical systems, such as switchgear, transformers, and circuit breakers. It ensures that the ground switch can only be operated under safe conditions, typically when other switches, such as circuit breakers or isolators, are in the correct position. This interlock device is crucial for preventing the grounding of equipment while it is still energized, thereby reducing the risk of electrical accidents and ensuring the safety of maintenance personnel. The device typically works by physically preventing the operation of the ground switch unless certain conditions are met, such as ensuring that the disconnecting switch is open or that the equipment has been properly isolated from the power supply. In some designs, the interlock may also include status indicators or alarms to signal whether the conditions for grounding are safe. The Ground Switch Interlock Device is commonly used in substations, power plants, and industrial electrical systems where high-voltage equipment is present and maintenance work needs to be performed safely. It enhances operational safety by preventing errors in the grounding process, ensuring that equipment is properly isolated and grounded before work begins. By incorporating interlocking mechanisms, the device helps to streamline maintenance procedures, minimize human error, and improve the overall reliability of the electrical system.
  • Switchgear front protection

    Switchgear front protection

    Our company is dedicated to providing high-quality switchgear components, including switchgear front protection solutions. Designed to safeguard switchgear systems, our front protection products offer robust defense against environmental factors and accidental damage. Utilizing advanced materials and engineering techniques, our solutions ensure durability and reliability in demanding conditions. We adhere to rigorous quality standards to deliver products that enhance the safety and longevity of electrical equipment. Committed to innovation and customer satisfaction, we provide tailored solutions that meet the unique needs of our clients, ensuring optimal performance and protection for their switchgear systems.
  • 10kV 11kV 12kV High Voltage AC 630A Indoor Embedded-pole Fixed Type VCB Vacuum Circuit Breaker

    10kV 11kV 12kV High Voltage AC 630A Indoor Embedded-pole Fixed Type VCB Vacuum Circuit Breaker

    VBI-12 Indoor High Voltage Vacuum Circuit Breaker is three-phase AC 50Hz, rated voltage of 12KV indoor device, for industrial and mining enterprises, power plants and substations as electrical equipment control and protection purposes, and for frequent operation of the place.which combined the technology of the ABB corporation in Switzerland and developed in China. Product complies with the standard GB1984 & IEC62271-100. VBI-12 VCB usually mounted into switchgear panel KYN28 and XGN. It is applicable in occasions with frequent operation, has functions of high-speed recloser, Multiple Opening/Closing, reliable mechanical interlock. It has fixed type & withdrawable type. It adopts the composite insulated material, there is no pollution and explosion danger, the insulation level is high.
  • Switchgear connector

    Switchgear connector

    Switchgear Connector – Product Details and Applications Product Overview: A switchgear connector is a crucial component used to facilitate the secure electrical connection between various modules, busbars, and devices within low- and medium-voltage switchgear systems. These connectors ensure reliable power flow and play a vital role in minimizing transmission losses while maintaining system safety and operational efficiency. They are typically made from high-conductivity materials such as copper, silver-plated alloys, or aluminum, ensuring optimal conductivity, corrosion resistance, and durability.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept