China Busbar clamp for switchgear Manufacturer, Supplier, Factory

SOLH HFP economical lever-type parallel pneumatic gripper adopts mechanical lever linkage transmission as a cost-effective lightweight gripping solution. Bore sizes cover 10/16/20/25/32 mm. Jaws close when piston extends and open on retraction; clamping force is 20%~30% higher than opening force for reliable workpiece holding. Mounting holes are available on three faces: side, bottom and rear. Built-in permanent magnets work with CS1-G magnetic switches for open/closed status feedback. Metal friction isolation plates reduce abrasion to adapt to high-cycle continuous operation. Positioned as an economical alternative to linear-guide grippers such as HFZ and MHZ2, it suits cost-sensitive light & medium load applications. Periodic grease maintenance on lever joints is recommended. Widely used for high-frequency handling of 3C plastic parts, miniature stamped hardware and small packaging components. Not recommended for conditions with persistent heavy offset loads or ultra-high precision assembly requirements.

The Switchgear Plug is a crucial component in electrical distribution systems, designed for seamless integration and reliable performance. Constructed from high-grade materials such as copper or aluminum, it ensures superior conductivity and durability under demanding conditions. The plug features precision-engineered contacts that provide stable electrical connections, minimizing resistance and heat generation.

SOLH MRHQ vane-type integrated rotary gripper is fully interchangeable with equivalent SMC models. It integrates a vane rotary module and parallel air gripper into a single actuator, replacing split combination of rotary table plus separate finger cylinder. Overall length is shortened by roughly 20% and tubing drag interference during rotation is eliminated. Bore sizes cover 10/16/20/25 mm with standard 90° and 180° rotation versions. End stop screws enable ±10° total angular fine adjustment. The double-acting parallel jaw achieves repeat positioning accuracy of ±0.01 mm. Five mounting surfaces together with locating bosses and pin holes enable fast centering and multi-orientation assembly. Built-in magnetic rings support up to four M9 series reed switches to detect both rotary limits and jaw open/closed status for full PLC interlock control. Adopting oil-free self-lubricating structure, it is widely used for workpiece gripping, flipping and direction conversion in confined-space 3C electronics and packaging automation lines for light & medium loads from 0.1 to 5 kg. A minimum 30% safety margin is required during load selection.

ZW32-24 outdoor AC high-voltage vacuum circuit breaker (hereinafter referred to as circuit breaker) is rated voltage of 24kV, 50Hz three-phase AC outdoor power distribution equipment. This product is absorbing foreign advanced technology. Based on the dry domestic raw materials and factory art, the 24kV outdoor high-voltage switchgear suitable for China's national conditions has been successfully developed. Compared with similar international products, it has the characteristics of miniaturization, maintenance free and intellectualization. At the same time, the product has no pollution to the surrounding environment and is a green environmental protection product. The circuit breaker complies with technical standards such as gb1984-2003 high voltage AC circuit breaker, DL t402-2007 technical conditions for ordering high voltage AC circuit breaker and DL / t403-2000 technical conditions for ordering 12kV ~ 40.5kV high voltage vacuum circuit breaker .

JAWS UPSTREAM The Switchgear Incoming Plug 3P 630A is a robust and efficient solution designed for high-performance electrical distribution systems. Engineered for three-phase applications, this plug ensures seamless connectivity and reliable power transfer in switchgear assemblies. Its 630A rating makes it suitable for industrial settings where substantial electrical loads are common, enabling operations in manufacturing plants, data centers, and large commercial buildings.

VBI-24 medium voltage vacuum circuit breaker is a kind of indoor medium voltage switch equipment with 50Hz/60Hz three phase AC 24kV rated voltage, which combined the technology of the ABB corporation in Switzerland and developed in China. Product complies with the standard GB1984 & IEC62271-100. VBI-24VCB usually mounted into switchgear panel KYN28 and XGN. It is applicable in occasions with frequent operation, has functions of high-speed recloser, Multiple Opening/Closing, reliable mechanical interlock. It has fixed type & withdrawable type. It adopts the composite insulated material, there is no pollution and explosion danger, the insulation level is high. VBI-24 indoor medium-voltage sealed vacuum circuit breaker is suitable for air-insulated indoor switches and is used for control and protection in power grids with AC and rated voltage of 24KV and below. Vacuum circuit breakers are used in frequent It has extremely excellent performance in operation and situations where the circuit breaker current needs to be opened, fully meets the requirements of automatic closing, and has high reliable operation and service life.