Ningbo Richge Technology Co., Ltd.
Ningbo Richge Technology Co., Ltd.
Products

China pneumatic manual foot directional valve Manufacturer, Supplier, Factory

With our abundant experience and considerate products and services, we have been recognized to be a reputable supplier for a lot of global consumers for pneumatic manual foot directional valve, 4F series foot pedal valve, 5/2 way pneumatic foot valve, full aluminum direct acting foot valve, double acting cylinder foot control valve, We have been wanting forwards to creating long-term company interactions with around the world shoppers.
pneumatic manual foot directional valve, Make sure you feel cost-free to send us your specifications and we'll respond to you asap. We have got a professional engineering team to serve for the every single thorough needs. Free samples may be sent to suit your needs personally to know far more facts. So that you can meet your desires, be sure to genuinely feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.

Hot Products

  • VBI-24 24kV Side Mounted Insulating Cylinder 3-phase Vacuum Circuit Breaker

    VBI-24 24kV Side Mounted Insulating Cylinder 3-phase Vacuum Circuit Breaker

    The VBI series indoor vacuum circuit breaker is a new generation of intelligent vacuum circuit breakers. Its live components, including the high-performance vacuum interrupter and upper and lower outgoing terminals, are encapsulated in epoxy resin post terminals. This design helps prevent contamination on the surface of the vacuum interrupter, enhancing its insulation properties, mechanical stability, and extending its operational lifespan. The operation mechanism of VBI-24 side mounted type vacuum circuit beaker is used spring to storage energy,which can be operated by two ways,manual or electrical.The characteristics are accordance with GB1984-89 ,JB3855-96<10kv Indoor High Voltage Vacuum Circuit Breaker General Technical Specifications>,Relevant Provisions of IEC56 standard.
  • VSG-12C embedded pole lateral type high voltage vacuum circuit breaker

    VSG-12C embedded pole lateral type high voltage vacuum circuit breaker

    VSG-C/12 type Side installation Indoor high voltage vacuum circuit breaker used spring to storage energy. The operating mechanism can be operated by two ways, by manual and electromotive operation, The characteristics is according with GB1984-2003 High Voltage AC Circuit Breaker, JB3855-1996 3.6-4.5KV Indoor AC High Voltage AC Circuit Breaker and IEC standard 62271-100:200162271-100:2001 High Voltage AC Circuit Breaker. VSG-12C indoor high-voltage side-mounted vacuum circuit breaker is an indoor and outdoor switchgear for 12kV power system. Loads of different natures, frequent operations, and occasions where short-circuit current is broken multiple times. The product adopts a new type of circuit breaker operating mechanism, and the primary part of VSG-12 can use international brand solid-sealed poles to seal the vacuum interrupter and the main conductive circuit parts into a whole to protect the interrupter from collision, dust and condensation. It has strong environmental adaptability, greatly reduces operation and maintenance costs, and truly realizes the maintenance-free one-time part of the product and less maintenance of the operating mechanism. Perform frequent operations or break short-circuit current multiple times; the mechanical life can be up to 30,000 times, and the full-capacity short-circuit current breaking times can reach 50 times
  • C85 Series Stainless Steel Mini Cylinder

    C85 Series Stainless Steel Mini Cylinder

    SOLH C85/CD85 stainless steel mini cylinder complies with ISO 6432 international standard and can be directly interchanged with equivalent SMC models. Bore sizes: φ8/10/12/16/20/25 mm. Barrel and piston rod are made of 304 stainless steel with excellent rust and corrosion resistance, applicable to humid, mild acid & alkali environments, as well as clean production lines for food, pharmaceutical and electronics industries. Adopting tie-rod-free crimped end cap structure, the cylinder features slim and lightweight design. Complete variants include standard double acting, single acting spring return/extend, double rod synchronous type and C85K square non-rotating rod cylinder. CD85 versions are equipped with built-in magnetic ring for position detection via magnetic switches. Standard rubber cushion is supplied; suffix C air cushion is optional for φ10~25 models to absorb impact under high-speed operation. The minimum starting pressure reaches 0.05MPa, supporting long-term oil-free operation with piston speed from 50 to 1500 mm/s, perfect for high-frequency short-stroke reciprocation. Full sets of ISO standard mounting options are available: integrated clevis, flange, foot mount, trunnion mount and more. Compared with MI and MA cylinders, C85 owns globally recognized ISO dimensions, bringing outstanding convenience for equipment replacement in overseas markets. A minimum 50% thrust safety margin is recommended during selection.
  • Switchgear main circuit connector

    Switchgear main circuit connector

    Product Introduction: Switchgear Main Circuit Connector The Switchgear Main Circuit Connector is a crucial component designed for seamless electrical connections in medium and low-voltage switchgear systems. These connectors ensure the efficient transmission of electrical power between various switchgear components, such as circuit breakers, transformers, and busbars, ensuring reliable operation in critical electrical infrastructure.
  • MXP Series Ultra-High Precision Compact Pneumatic Slide Table

    MXP Series Ultra-High Precision Compact Pneumatic Slide Table

    SOLH MXP ultra-high precision pneumatic slide table is interchangeable with SMC MXP series. It adopts integrated martensitic stainless steel body and built-in ball linear guide, achieving travel parallelism of 0.004mm, rotational error down to ±0.03° and repeat positioning accuracy ±0.01mm. The ultra-narrow compact body is 10%~20% slimmer than MXJ models, supporting three-side mounting and switchable axial/lateral piping. Bore sizes φ6~16mm equipped with standard rubber buffers, optional metal limiters and hydraulic buffers available for φ8 and above. It supports oil-free clean environment and stable high-frequency reciprocation. Ideal for confined-space automation stations requiring strict motion precision, such as optical inspection, chip bonding, micro component assembly and premium medical equipment.
  • Switchgear round cover plate

    Switchgear round cover plate

    Our company provides high-quality switchgear round cover plates designed for robust protection and reliable performance. These cover plates are crafted from durable materials to safeguard switchgear components from dust, moisture, and physical damage. Engineered for precision, our round cover plates ensure a secure fit and easy installation. Complying with stringent industry standards, they are ideal for various industrial and commercial applications, enhancing the safety and longevity of electrical systems while providing effective protection and accessibility.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept