China SDAD twin rod compact cylinder SDAJ adjustable stroke thin cylinder Manufacturer, Supplier, Factory

SOLH MHC2 pivot-type angular swing pneumatic gripper is fully interchangeable with equivalent SMC models. A rocker arm mechanism drives jaws to rotate around the bottom pivot with maximum single-jaw swing angle of 30°, differing from linearly moving MHZ2 parallel grippers. Bore sizes cover 6/10/16/20/25 mm, available in D double acting and S single-acting normally open variants (no NC normally closed version). Built-in one-way throttle valves enable direct speed adjustment. Pre-installed magnetic rings work with M9BW reed switches to transmit jaw status signals to PLC systems. The low-profile compact body is ideal for outer wrapping clamping in equipment with limited in-depth space. Due to lever principle, effective clamping torque drops sharply with extended fixtures; load verification based on jaw overhang length is compulsory during selection. Widely applied for outer clamping of 3C plastic housings, bottle caps and tubular small parts, side feeding and pick-and-place for miniature robot end effectors. MHZ2 parallel grippers are recommended for applications requiring centered high-precision gripping, long fixture loads or power-off holding function.

At Richge, we specialize in high-quality Switchgear Drawer Guide Pins, designed to enhance the performance and reliability of electrical switchgear systems. Our guide pins ensure smooth, precise movement of switchgear drawers, facilitating easy installation and maintenance. Manufactured from durable materials, they offer exceptional resistance to wear and corrosion, guaranteeing long-term operational efficiency. With a commitment to innovation and quality, our Switchgear Drawer Guide Pins are engineered to meet the highest industry standards, providing dependable solutions for various switchgear applications. Trust us for your switchgear components and experience unparalleled performance and reliability.

SOLH ZSE30A / ZSE30AF / ISE30A high precision digital pressure switches are fully interchangeable with matching SMC models, boasting ultra-high measurement accuracy of ±0.2%FS with 4-digit dual-color red/green LCD. Green backlight activates when pressure stays within preset safe range, red light triggers for overpressure/underpressure alarm; display logic can be reversed as needed. Three measuring ranges cover full application demands: ZSE30A for single vacuum 0~-101kPa, ZSE30AF universal compound pressure -100~+100kPa, ISE30A standard positive pressure -0.1~1.0MPa for mainstream 0.4~0.7MPa factory air supply. Each unit comes with 2-channel independent NPN/PNP open collector switch outputs, with optional 1~5V analog voltage or 4~20mA analog current signals for continuous closed-loop PLC pressure data acquisition. Exclusive one-click parameter copy function transfers settings from one master unit to up to 10 slave units, drastically cutting batch commissioning errors. Powered by wide-range DC12~24V, fitted with M5/Rc1/8 port and IP40 dustproof rating. Widely deployed for cylinder clamping pressure monitoring, vacuum chuck adsorption failure alarm and real-time pressure supervision across all automated pneumatic circuits, outperforming traditional mechanical pressure switches in precision, remote visibility and signal expandability.

Richge specializes in high-quality switchgear solutions, with a focus on providing advanced Switchgea Insulated Grille for electrical systems. Our Insulated Grilles are designed to ensure safe isolation within switchgear equipment, preventing electrical faults and short circuits. Made from premium insulating materials, they offer exceptional voltage and heat resistance for long-term reliable performance. Our products meet international safety standards and are widely used in substations, distribution panels, and other electrical installations. With cutting-edge technology and rigorous quality control, we are dedicated to delivering dependable and safe switchgear solutions to our clients.

Richge is a manufacturer of High Voltage One-Piece Insulators in China, specializing in producing high-quality insulators designed to provide reliable electrical insulation and mechanical support in high-voltage systems. Our one-piece insulators are engineered for durability, precision, and optimal performance in demanding environments.

Richge is dedicated to delivering high-quality low-voltage switchgear products, focusing on innovation and technological optimization. The Switchgear Shutter Connecting Lever is a crucial component in our product line, ensuring operational safety and system stability. Through precise engineering and strict quality control, this connecting lever guarantees accurate positioning and reliable performance during switch operations, making it ideal for various industrial applications. Richge is committed to providing customers with dependable switchgear solutions that meet the demands of modern power systems.