China Switchgear aluminum alloy support Manufacturer, Supplier, Factory

General Introduction GW1 series outdoor high voltage disconnect switch is the high voltage switch equipment of composite structure, is suitable for outdoor 12kV 、24KV 、40.5KV. line net with voltage and no load, to make opening and close. With CS□type manpower operate machinery, can avoid earth line with power and composite flash-locks etc wrong operate. The operator is no need to put another earth line. Pollution-proof type isolate switch satisfy customer in filthy conduction area. It can solve the pollution of shed when it is working. The GW1 series outdoor high voltage isolator switch is designed for reliable and durable performance in high voltage power distribution systems. Available in 12KV, 24KV, and 40.5KV, and current ratings from 630A to 1250A, these switches are built to withstand harsh environmental conditions, including high pollution and severe weather. With compliance to international standards IEC62271-103 and DL/T 486-2010, they ensure safety and operational integrity. GW1 outdoor AC high voltage isolating switch is suitable for installation on the line of outdoor high voltage power distribution equipment, which is used to cut off the line and convert the line when the line has voltage and no load. User-friendly installation and maintenance are facilitated by manual or electric operation mechanisms. The GW1 series is suitable for various environments, including high altitudes and extreme temperatures, making it an ideal choice for secure electrical isolation in outdoor systems.

SOLH XTO674 and INA14 inline check valves share the same structural platform with ultra-low 0.01MPa cracking pressure, compatible with both compressed air and clean water for anti-backflow protection in vacuum and low-pressure fluid pipelines. XTO674 is an all-brass cryogenic version working down to -30℃; INA14 standard series provides brass or SUS304 stainless steel body, equipped with standard NBR seals plus optional oil & high temp resistant FKM and weather-proof CR seals. Compact inline threaded design with flow arrow marking can be directly mounted in pipelines without extra brackets, effectively preventing vacuum loss and reverse airflow when installed between vacuum generators and suction cups. The two series feature identical overall dimensions and thread sizes for direct field interchange without pipe modification, widely applied in cryogenic equipment, vacuum production lines, corrosion-resistant high-temperature fluid circuits and general pneumatic & water pipelines for one-way pressure retention and backflow prevention.

SOLH MXQ economical pneumatic slide table is interchangeable with SMC MXQ series. It adopts dual-piston driving and non-preloaded recirculating ball guide rail, built as an ultra-thin lightweight integrated unit with lower height and lighter weight than MXS, achieving repeat positioning accuracy of ±0.02mm. Three-sided mounting with positioning pin holes (bottom, side and axial) is available. Bore sizes φ6~25mm, standard strokes 10~150mm, optional 0~5mm stroke adjusters. Built-in magnet fits magnetic switches and supports oil-free operation. As a cost-effective basic linear actuator, it fits budget-sensitive projects and is widely used for light-load high-frequency transfer of small electronic and plastic parts and standard-precision automated assembly lines.

SOLH CRBU2 ultra-thin free-mount vane rotary actuator is fully interchangeable with equivalent SMC models, available in bore sizes 10/15/20/30/40. Integrated cylindrical body enables bracket-free multi-directional fixing, 12% lighter than CRB2 series, perfect for concealed installation inside compact integrated machinery. Direct vane drive eliminates gear backlash with ultra-high angular repeatability of ±0.01°. Two vane variants: S single vane for max 270° swing, D double vane delivering double torque with limited 90°/100° rotation. Dual piping layouts are offered: standard side ports and suffix-E central axial ports. Optional suffix-W angle adjuster realizes infinitely adjustable stroke from 0 to 240°, and built-in magnetic rings support M9BW reed switches for PLC limit feedback. Low-friction composite sealing ensures oil-free operation with over 5 million service cycles. Widely applied to light-load high-frequency precision rotation tasks including 3C miniature jig turnover, vision camera positioning, screw tightening mechanisms and small-angle packaging switching. Compared with base-mounted CRB2 rotary cylinders, CRBU2 requires no mounting brackets and maximizes space efficiency, ideal for robot end effectors and narrow internal equipment layouts.

The Square Lock Core for Switchgear is an advanced locking mechanism designed to enhance the security and operational integrity of electrical switchgear systems. Constructed from high-grade stainless steel, this lock core offers exceptional durability and resistance to corrosion, ensuring reliable performance in demanding environments.

SOLH IS3000 piston-type mechanical pneumatic pressure switch is fully interchangeable with equivalent SMC models. Air pressure pushes the built-in piston to actuate a 1NO+1NC micro contact switch, with adjustable pressure range 0.1~0.7MPa, hysteresis ≤0.05MPa and repeatability ±0.05MPa. Die-cast aluminum housing reaches IP40 dustproof grade, equipped with top adjustment knob and graduated window for offline pressure setting without power supply. Standard port Rc1/4, optional NPT1/4 thread, IS3100 gasket mounting version and IS3010 micro-load variant dedicated for PLC, as well as indicator light optional model. Its solid piston mechanical structure delivers outstanding shock and vibration resistance, stable on vibratory feeders, knocking hammers and stamping machines without signal drift or false triggering common to digital electronic switches. Max contact load 1A allows direct driving of miniature solenoid valves or connection to PLC digital inputs, widely applied for main air source low-pressure protection, cylinder clamping position confirmation and pneumatic safety interlock for vibration equipment. It provides higher electrical load capacity than IS10 reed switches and better cost performance & vibration stability than ISE30A digital pressure switches.