China replace external guide cylinder integrated pneumatic slide table Manufacturer, Supplier, Factory

ZW32-12 (FDGM) series outdoor high-voltage vacuum circuit breakers (hereinafter referred to as "circuit breakers") are outdoor distribution switchgear with a rated voltage of 12KV and three-phase AC 50Hz. Circuit breakers are mainly used for breaking and closing load current, overload current, and short circuit current in power lines. They have overload and short circuit protection functions, meet control and measurement requirements, and can also achieve remote control and monitoring functions. They are widely used in substations, industrial and mining enterprise distribution systems as control and operation purposes, especially suitable for places that require frequent operation. The circuit breaker complies with technical standards such as GB1984-2003, DL/T402-2007, and IEC60056.It is also used in rural power grid places with frequent operation for breaking and dlosing the load current and over load curent and short circuit current of power system，It is mainly used to break and close the load current, overload current and short circuit current in the power system. It is suitable for protection and control in substation and industrial and mining enterprise substation systems, and places where rural power grids operate frequently.

SOLH MXJ ultra-compact high-precision pneumatic slide table is interchangeable with SMC MXJ series. Equipped with integrated stainless steel ball linear guide, it achieves parallelism accuracy of 0.005mm and repeat positioning accuracy ±0.01mm. The ultra-thin lightweight body supports top, bottom and side three-sided mounting, 30%~50% smaller than MXQ slide tables. Bore sizes φ4.5~16mm, equipped with dual-end rubber buffers, and optional metal limiters for 0~5mm adjustable stroke. Symmetrical design enables left-right interchange of piping and sensors, suitable for oil-free clean environments. Capable of stable high-frequency short-stroke movement, widely adopted for micron-level linear motion in 3C micro handling, optical inspection, miniature assembly and compact medical automation equipment.

SOLH MGP series thin compact guide rod cylinder is dimensionally interchangeable with genuine SMC products. It adopts an integrated structure of cylinder barrel, dual guide rods and precision bearings with built-in torsion resistance and powerful lateral load capacity without external guiding accessories. Its flat slim structure cuts 17%~24% weight compared with conventional cylinders, perfectly suitable for compact automation operations such as pressing, positioning, lifting and workpiece transfer. Three sub-types classified by bearings cover diverse working conditions: MGPM with metal sliding bushings features outstanding wear resistance and dustproof performance for heavy lateral loads and dusty low-speed cyclic work; MGPL ball bushings deliver ultra-low friction and smooth motion for high-speed frequent reciprocation; MGPA zero-clearance high-precision ball bearings achieve anti-rotation accuracy up to ±0.01mm for precision fitting and calibration. Bore sizes range from φ12 to 100 mm with standard strokes of 5~300 mm. Standard dual-end rubber buffers are equipped, while AZ air cushion buffers are optional for bores above 20 mm to absorb severe impact during high-speed heavy-duty movement. Built-in slots support direct installation of D-M9, A93 magnetic switches without extra brackets for tidy wiring. Operating pressure ranges from 0.12 MPa to 1.0 MPa with a minimum actuating pressure of 0.1 MPa under ambient temperature of -10℃~60℃. Widely deployed in electronic PCB positioning & pressing, inspection jig lifting, packaging feeding and general automation limiting clamping, it acts as a highly versatile integrated guided pneumatic actuator.

Richge is a manufacturer of Switchgear Protection Cover in China,Professional equipment to create high-quality products.Switchgear Protection Cover mainly sold to Russia,Central Aisa,the Middle East,the European Union,used in the high-speed rail,airport and large power plants.Richge is committed to becoming your strongest support among suppliers in China, providing comprehensive support and assurance for your products.

FKN12-12D series air-blast Ioad break switch and FKRN12-12D series air-blast load break switch-fuse combination apparatus are new series switchgear applies to three-phase electric distribution system of rated 12kV, acting as protecting and control apparatus for transformers, cable and overhead wiring. These series are especially applicable in rural, urban terminal substation and prefabricated substations, as well as ring network power supply. FKN12-12D can break and make Ioad current and over-current. FKRN12-12D can break and make over-current load current and short-circuit current(Iimited current fuse). This product is featured with impact structure aesthetic appearance. reliable interlock and high insulating level. In the spring storage operation mechanism, ON/OFF speed is free from the influence of the manpower. For the arc-extinguish, electric arc-extinguish inside the insulating cover, the free gas occurs at sparking do not cause descend of insulating level between phases and phase to earth. The insulation cover clapboard separates electrified part thus boost protection grade of ring main unit. The copper-tungsten contact and main contact brings along reliable conductivity and long life. This product achieves sound fame due to easy maintenance and operation as well as reliable performance. It is in compliance with IEC62271-105.

SOLH MXQ economical pneumatic slide table is interchangeable with SMC MXQ series. It adopts dual-piston driving and non-preloaded recirculating ball guide rail, built as an ultra-thin lightweight integrated unit with lower height and lighter weight than MXS, achieving repeat positioning accuracy of ±0.02mm. Three-sided mounting with positioning pin holes (bottom, side and axial) is available. Bore sizes φ6~25mm, standard strokes 10~150mm, optional 0~5mm stroke adjusters. Built-in magnet fits magnetic switches and supports oil-free operation. As a cost-effective basic linear actuator, it fits budget-sensitive projects and is widely used for light-load high-frequency transfer of small electronic and plastic parts and standard-precision automated assembly lines.