China ABB MNS3.0 cable connection accessories Manufacturer, Supplier, Factory

SOLH MY1B mechanically jointed basic rodless cylinder achieves full interchangeability with corresponding SMC models. Equipped with inner sealing belt and outer dust-proof belt, it cancels the external piston rod, whose overall installation length is close to effective stroke and saves more than 50% layout space compared with tie rod cylinders. Bore sizes range from φ10 to 100mm with maximum stroke up to 5000mm. The slide table is rigidly connected with the piston with outstanding bending resistance, allowing direct load mounting without auxiliary guides under light loads. Four-direction piping (front, rear, side, bottom) is available; models φ25~40 realize 17% weight reduction. Standard built-in adjustable air cushions are equipped, with optional external hydraulic buffers and dual-end stroke adjusters. Pre-reserved grooves fit D-M9 series magnetic switches, and oil-free operation is supported for clean workshops. Classified by load capacity: φ10~20 for light duty, φ25~40 for medium-light duty, φ50~63 for medium duty, φ80~100 for heavy duty. Widely applied in long-distance material conveying, automatic door actuation, heavy workpiece shifting in machining and long-stroke positioning pushing on non-standard automation lines as an economical universal linear driving solution.

GN19-12 Indoor High Voltage Disconnect Switch GN19-12 series indoor high voltage disconnect switch belong to high voltage switch equipments, applies to power system of rated voltage 12KV, AC 50Hz and less than it system, it is equipped with CS6-1 manual operating mechanism and is used to break and make circuit under no-load but with voltage. There are additional pollution abatement type, high altitude type and electrified display. The role of the disconnect switch is to disconnect the circuit without load current. So that the equipment to be serviced and the power supply has a clear disconnection point to ensure the safety of maintenance personnel, isolation switch without special interrupting device can not cut off the load current and short-circuit current, so the circuit must be in the circuit breaker to break the circuit before you can operate the isolation switch.

FLN48-12 load break switch use SF6 gas as arc extinguishing and insulating medium. There are three work stations: opening, closing and grounding in the switch. It has small volume, installing easy-to -use, strong environmental adaptabiliy and other characterist.. It is also for the control and protection of substation and equipments; making and breaking short-circuit current under various operating status of electric network and its performance indicators meet the national standard GB/T3804-2017 "3.6kV-40.5kV high-voltage AC load switch", which is the main switching element of the ring main unit.

SOLH IR series precision pilot regulators adopt advanced nozzle-flapper internal pilot structure, delivering 0.2% ultra-high control accuracy and excellent repeatability. It stably maintains output pressure against air source fluctuation and dynamic load changes. Featuring high flow rate, fast response and ultra-low air consumption of 1–3 L/min for significant energy savings, it supports manual adjustment and pneumatic remote control. Compact and flexible with built-in overpressure protection, it is widely used in semiconductors, precision testing, tension control, medical instruments and high-end precision automation systems.

SOLH RSQ fixed-height pneumatic stopper cylinders serve as standard limit actuators for automated conveyor systems. Equipped with ten interchangeable rod ends including hydraulic buffer lever styles for heavy shock absorption, they support four-side magnetic switch fitting and oil-free long-cycle operation. Differing from height-adjustable RSG models, its fixed rigid frame cuts on-site debugging time greatly. Our stable mass production ensures sufficient spot stock; these stoppers are widely deployed on electronics assembly lines, roller conveyors and heavy pallet positioning stations globally, delivering reliable workpiece blocking with affordable cost and strong impact resistance.

Our company specializes in high-quality Switchgear Panel Plates, designed for durability and optimal performance in electrical distribution systems. Our panel plates are crafted from robust materials to ensure long-term reliability and resistance to harsh environments. Engineered with precision, they offer easy installation and integration into switchgear assemblies. Compliant with international standards, our switchgear panel plates enhance the safety, efficiency, and functionality of electrical systems across various industrial and commercial applications.