China FN18-12 Series Indoor H.V. Load Switch Manufacturer, Supplier, Factory

LW-126 type outdoor high voltage alternating current sulfur hexafluoride circuit breaker (hereinafter referred to as the circuit breaker) is a kind of outdoor high-voltage switchgear equipment with three poles AC SOHzand it adopts SF6 gas as arc extinguishing and insulation medium. It can be used for the separation and combination of rated current and fault current, capacitor bank, and switching circuit, and it can also be used as aninterconnecting breaker so as to realize the control and protection of transmission lines and equipment, especially suitable for frequent operation.The circuit breaker is equipped with CT20 type spring operation mechanism.This circuit breaker complies with the requirements of IEC 62271-100. Lw36-126 3150-40 self-energized Ac high-voltage sulfur hexafluoride circuit breaker is an outdoor product, suitable for altitudes not exceeding 2,ooo meters (products can be designed for altitudes above 3,ooo meters), and the ambient temperature is not lower than -40°c. In the Ac 50Hz power grid with a maximum voltage of 126KV in areas with a pollution level no higher than Level Iv, it is used to cut off rated current, fault current or conversion lines to achieve power control.For system control and protection, it can also be used as a contact circuit breaker This product uses sF6 gas as arc extinguishing and insulating medium, adopts the most advanced self-energy arc extinguishing technology in the world, and is equipped with a new spring operating mechanism. It has the characteristics of long electrical life, low operating power, low noise, and high reliability., with its simple structure, small size and long maintenance cycle, it can completely replace the same type of imported products in the current process of oil-free and large-capacity power equipment.

FKN12-12D series air-blast Ioad break switch and FKRN12-12D series air-blast load break switch-fuse combination apparatus are new series switchgear applies to three-phase electric distribution system of rated 12kV, acting as protecting and control apparatus for transformers, cable and overhead wiring. These series are especially applicable in rural, urban terminal substation and prefabricated substations, as well as ring network power supply. FKN12-12D can break and make Ioad current and over-current. FKRN12-12D can break and make over-current load current and short-circuit current(Iimited current fuse). This product is featured with impact structure aesthetic appearance. reliable interlock and high insulating level. In the spring storage operation mechanism, ON/OFF speed is free from the influence of the manpower. For the arc-extinguish, electric arc-extinguish inside the insulating cover, the free gas occurs at sparking do not cause descend of insulating level between phases and phase to earth. The insulation cover clapboard separates electrified part thus boost protection grade of ring main unit. The copper-tungsten contact and main contact brings along reliable conductivity and long life. This product achieves sound fame due to easy maintenance and operation as well as reliable performance. It is in compliance with IEC62271-105.

Product Details and Application of Square Nut for Switchgear The Square Nut for Switchgear is a critical component designed for secure fastening and reliable electrical connections within switchgear assemblies. Made from high-strength materials, these nuts offer exceptional durability and resistance to wear, ensuring a long service life even in demanding environments.

At Richge, we specialize in high-quality switchgear components, including our precision-engineered Switchgear Steel Bowl Gasket. Designed for durability and reliability, our Steel Bowl Gaskets are essential for maintaining secure seals and preventing leaks in switchgear assemblies. Crafted from robust steel, these gaskets offer superior resistance to extreme temperatures and pressures, ensuring optimal performance and longevity. Our commitment to excellence and innovation ensures that each gasket meets the highest industry standards, providing our clients with dependable solutions for their switchgear needs. Trust Richge for advanced switchgear components that deliver unmatched quality and performance.

switchgear claw mechanism Our company specializes in high-quality Low Voltage Switchgear Electrical Cabinet Door Handles, designed for durability and ease of use. Our handles are crafted from robust materials to ensure long-term reliability and secure operation in various industrial and commercial settings. Engineered to meet international standards, they offer ergonomic design and smooth functionality, enhancing the safety and efficiency of electrical cabinets. Ideal for low voltage switchgear applications, our door handles combine strength and convenience to support seamless operations.

Switchgear Clamping Component: Product Details and Applications The Switchgear Clamping Component is an essential device designed to secure and stabilize electrical connections within switchgear systems. Constructed from high-quality, durable materials, such as stainless steel or reinforced plastic, these components are engineered to withstand extreme environmental conditions, including high temperatures and humidity, ensuring long-lasting performance and reliability.