China M9B A93 magnetic switch compatible CDM2 cylinder built-in magnet Manufacturer, Supplier, Factory

SOLH MHY2 cam-driven 180° wide swing pneumatic gripper is fully interchangeable with equivalent SMC models. It adopts cam transmission instead of gear mechanism, achieving maximum 180° opening angle with -3° over-close position to prevent workpiece loosening. Bore sizes cover 10/16/20/25 mm, purely double acting without single acting NO/NC variants, and repeat positioning accuracy reaches ±0.02 mm. Optimized narrow clearance construction enhances dust resistance. Four-side sensor grooves are available, and through-hole mounting is optional. Built-in magnetic rings work with M9 series reed switches to send open/closed feedback signals to PLC. Due to lever transmission, effective clamping force declines sharply with extended jaw overhang; torque verification is required during selection, and clamping arm length is recommended within 35 mm. Ideal for picking and flipping large-diameter tubular and irregular workpieces at miniature robot end effectors. MHW2 gear swing gripper is recommended if power-off holding or larger heavy-duty bore is required; MHZ2 parallel gripper is preferred for centered linear clamping.

Product Details and Application ofSide wiring secondary connecto The Side wiring secondary connecto is a crucial component designed to facilitate secure A side-wired secondary connector is an electrical connector used for secure, side-entry connections of secondary circuits, such as transformers or distribution systems. Used to connect sensors, control relays or other secondary components that require fast and reliable electrical connections These connectors are especially important in applications where space limitations or easy maintenance are considered, and are used for secondary connections to power distribution boards, ensuring safe and reliable terminals. Switchgear and control panel: Designed to adapt to various environmental conditions, such as high temperature, low temperature, high humidity, etc. The metal parts are treated with rust removal, spraying, painting, etc., to improve their corrosion resistance and aesthetics.

FKN12-12D/630-20 indoor AC high-voltage load switch is a three-phase high-voltage switchgear with a rated voltage of 12KV and a rated frequency of 50HZ. It is used for switching load current, closed-loop current, no-load transformer and cable charging current, off combined short-circuit current. The load switch equipped with the grounding switch can withstand short-circuit current.and m-ainly used in power distribution substation and industrial electrical equipment where three phase closed loop circuit or bottom power supply system for control and protection.

SOLH CM3 short stainless steel mini cylinders are upgraded compact replacements for traditional CM2 series pneumatic actuators. Constructed entirely from 304 stainless steel, they deliver outstanding rust and weak acid-alkali corrosion resistance suitable for food, pharmaceutical and clean workshop environments. Optimized structure shortens overall length by up to 29mm and cuts weight by 21%, paired with four-directional air ports to enable flexible multi-angle installation in narrow equipment space. Multiple variants including double-acting, spring single-acting, double-rod and anti-rotation piston rod meet diverse linear drive requirements; CDM3 magnetic version supports magnetic switch sensing for PLC automatic interlock control. Low-friction oil-free sealing ensures over 8 million stable operating cycles. Our factory maintains mass production and sufficient spot inventory, widely applied in medical packaging, electronic assembly and food processing automated positioning.

The indoor High-Voltage Grounding Device is a safety protection device designed for high-voltage power systems, used to effectively isolate electrical equipment from the grid and ground it, ensuring the safety of personnel and equipment during maintenance or inspection. This product is typically suitable for voltage levels ranging from 12kV to 40.5kV, with strong short-circuit current withstand capabilities and reliable mechanical operation performance. Its compact structure, easy installation, and flexible operation make it widely applicable in high-voltage switchgear and substations. Designed to meet both national and international standards, it ensures long-term stable operation in complex power environments.

SOLH G series pneumatic pressure gauges are dedicated to compressed air measurement, split into rear-thread G type for panel embedding and side-thread GA type for inline pipe mounting. Dial sizes range from φ15 to φ63 with measuring spans of 0.2~1.5MPa. Standard accuracy is ±3% FS, while mini G15 and G27 reach ±5% FS. L variants equipped with red-green limit rings enable intuitive visual pressure state identification; large dial G53-L and G63-L guarantee clear readings from long distances. Connection threads include M5, R1/16, R1/8 and R1/4. Standard brass fittings are supplied, and copper-free oil-free clean versions are optional for semiconductor high-purity gas circuits. The gauge adopts zinc alloy / nickel-plated aluminum housing and impact-resistant polycarbonate window. Widely matched with solenoid valves, regulators and automation equipment for real-time air pressure monitoring, all sizes are fully interchangeable with imported equivalent pressure gauges.