China PBT body pneumatic check valve SUS304 jaw Manufacturer, Supplier, Factory

SOLH MHS3 3-jaw and MHS4 4-jaw wedge-cam self-centering hollow pneumatic grippers are fully interchangeable with equivalent SMC models. Wedge cam transmission drives synchronous jaw centering, achieving repeat positioning accuracy of ±0.01 mm. Bore sizes range from 16 to 125 mm. Standard double acting (D) design, with optional single acting normally closed (C) / normally open (E) spring return versions. The central hollow through hole allows routing of air tubes, ejector pins and optical fibers, supporting both external clamping and internal expanding gripping. Evenly spaced three jaws of MHS3 provide superior coaxiality, ideal for shafts, discs and ring-shaped workpieces. Orthogonally arranged four jaws of MHS4 deliver stable constraint for square, rectangular and irregular flat parts to avoid tilting. Built-in permanent magnets are compatible with M9BW series magnetic switches. The low-profile compact body fits robot end effectors perfectly. Derivative variants include dust-protected MHSJ3 and extended hollow MHSH3. Widely applied to machine tool loading/unloading, bearing press-fitting, handling of 3C circular & square components and concentric assembly of tubular workpieces.

Richge specializes in manufacturing and supplying Switchgear Drawer Handles designed for durability and ease of use. We provide high-quality handles that ensure secure operation and long-lasting performance in various switchgear systems. With a focus on precision engineering and innovative design, our handles are crafted to meet the specific needs of industrial and commercial applications. Our commitment to quality and customer satisfaction drives us to deliver products that enhance the reliability and efficiency of electrical systems worldwide. Trust us to provide the essential components that contribute to the safety and functionality of your switchgear equipment.

SOLH HFP economical lever-type parallel pneumatic gripper adopts mechanical lever linkage transmission as a cost-effective lightweight gripping solution. Bore sizes cover 10/16/20/25/32 mm. Jaws close when piston extends and open on retraction; clamping force is 20%~30% higher than opening force for reliable workpiece holding. Mounting holes are available on three faces: side, bottom and rear. Built-in permanent magnets work with CS1-G magnetic switches for open/closed status feedback. Metal friction isolation plates reduce abrasion to adapt to high-cycle continuous operation. Positioned as an economical alternative to linear-guide grippers such as HFZ and MHZ2, it suits cost-sensitive light & medium load applications. Periodic grease maintenance on lever joints is recommended. Widely used for high-frequency handling of 3C plastic parts, miniature stamped hardware and small packaging components. Not recommended for conditions with persistent heavy offset loads or ultra-high precision assembly requirements.

SOLH MGF low-profile guide table cylinder is fully interchangeable with matching SMC counterparts. Designed with an integrated large-diameter concentric guide sleeve, it breaks the directional limitation of traditional dual guide rod cylinders and delivers uniform 360° anti-deflection performance against eccentric loads. Its overall installation height is reduced by 15%~20% compared with MGQ series for an ultra-flat compact layout. Available bore sizes: φ40, φ63, φ100 mm with standard short strokes ranging from 30 mm to 100 mm, optimized for short-stroke heavy-duty operation. Built-in anti-rotation pins provide extremely high allowable torque up to 409 N·m for the φ100 model, stable under eccentric force from all directions without jamming or displacement, with peak anti-rotation accuracy of ±0.05°. Bi-directional top-and-bottom mounting is supported; T-slots on three sides of the body enable magnetic switch installation on four sides. Standard dual-end rubber buffers and oil-free maintenance-free operation are equipped. The 10- prefixed low-dust clean version meets strict requirements of semiconductor, 3C electronics and medical workshops. Around 15% lighter than conventional structures, it is widely deployed for workpiece jacking, jig ejection, station indexing flipping and short-distance heavy-duty pushing, being the ideal compact pneumatic actuator requiring omnidirectional anti-deflection and high torque capacity within limited installation space.

Switchgear Adjustment Ring: Product Details and Applications The Switchgear Adjustment Ring is a crucial component designed to ensure precise alignment and operational efficiency in various switchgear systems. Typically constructed from high-quality, durable materials such as stainless steel or reinforced plastic, this adjustment ring is engineered to withstand harsh environmental conditions, including moisture, temperature fluctuations, and mechanical wear.

Small bus end cover for switchgear Product Background: Richge is a manufacturer of Small Bus End Covers for switchgear in China, specializing in precision-engineered components that provide essential protection and finishing for busbar connections within switchgear systems. Our bus end covers are designed to enhance the safety, performance, and reliability of electrical installations.