China KQ2UD 1-in 4-out pneumatic manifold fitting Manufacturer, Supplier, Factory

With our exceptional administration, robust technical capability and strict high-quality control procedure, we carry on to provide our consumers with dependable high-quality, reasonable selling prices and superb providers. We aim at becoming amongst your most responsible partners and earning your pleasure for KQ2UD 1-in 4-out pneumatic manifold fitting, KQ2U Y-type 1-in 2-out push-in fitting, SMC KQ2U KQ2UD replacement fitting, pneumatic Y splitter push in connector, vacuum cup array manifold KQ2UD, We sincerely welcome mates to negotiate organization and start cooperation. We hope to affix hands with good friends in different industries to produce a fantastic long term.
KQ2UD 1-in 4-out pneumatic manifold fitting, Make sure you really feel free to send us your requirements and we'll respond to you asap. We now have got a qualified engineering group to serve for your just about every in depth needs. Cost-free samples could be sent for yourself personally to understand much more information. In an effort to meet your requires, remember to actually feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd items. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is actually our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.

Hot Products

MXJ Series Air Slide Table
SOLH MXJ ultra-compact high-precision pneumatic slide table is interchangeable with SMC MXJ series. Equipped with integrated stainless steel ball linear guide, it achieves parallelism accuracy of 0.005mm and repeat positioning accuracy ±0.01mm. The ultra-thin lightweight body supports top, bottom and side three-sided mounting, 30%~50% smaller than MXQ slide tables. Bore sizes φ4.5~16mm, equipped with dual-end rubber buffers, and optional metal limiters for 0~5mm adjustable stroke. Symmetrical design enables left-right interchange of piping and sensors, suitable for oil-free clean environments. Capable of stable high-frequency short-stroke movement, widely adopted for micron-level linear motion in 3C micro handling, optical inspection, miniature assembly and compact medical automation equipment.
4V Series Solenoid Valve |5 /2 Way 5 /3 Way
SOLH 4V series pilot-operated pneumatic directional control valves are mainstream industrial pneumatic components covering 5/2-way two-position and 5/3-way three-position configurations, specially optimized for driving reciprocating movement, mid-stroke positioning and pressure retention of double-acting pneumatic cylinders. Adopting high-precision spool valve core and built-in pilot actuation structure, this series features low friction resistance, sensitive switching action and low coil power consumption, widely deployed in automated assembly lines, packaging machinery, positioning fixtures and general pneumatic transmission systems. The five-port layout complies with universal industry standards: P serves as the main air supply inlet; A and B are two execution ports connected to the front and rear chambers of double-acting cylinders to control extension and retraction; R and S are exhaust ports configured with silencers to lower running noise. The 5/2-way type includes single-coil electric control and double-coil electric control variants. Single-electric-control valves rely on spring reset to return automatically upon power cut, ideal for conventional reciprocating actions and safety reset applications. Double-electric-control valves possess position memory without springs, locking the current cylinder position steadily after power off for long-time positioning and pressure holding. The 5/3-way three-position version provides three optional neutral modes: closed center (Type C) locks all ports for cylinder suspension locking and anti-drop protection; exhaust center (Type E) connects A/B ports to exhaust channels for pressure relief and free floating during manual commissioning; pressure center (Type P) feeds compressed air to both working ports for bidirectional balanced clamping. Available specifications range from 4V110 up to 4V410 with thread sizes M5, G1/8, G1/4, G3/8 and G1/2. Equipped with IP65 dustproof and waterproof coils supporting mainstream AC and DC voltages, the whole series supports oil-free operation and comes with a manual override button for convenient on-site testing and maintenance. It is the universal standard directional valve for mainstream industrial pneumatic automation.
SDA Series Compact Cylinder
SOLH SDA square ultra-thin compact cylinder is an economical compact pneumatic actuator. Its body length is only 1/2~1/3 of standard tie rod cylinders and supports embedded installation to save space. Mounting dimensions are interchangeable with Airtac ACQ and SMC CQ2 series. It offers comprehensive variants: double acting, SSA/STA single spring return, SDAD twin rod, SDAJ adjustable stroke and SDAS magnet-equipped models. Built-in rubber bumpers at both ends absorb shock and reduce noise. Grease-stored low friction seal enables long-term oil-free operation. Bore sizes φ12~100mm, suitable for short-stroke pushing, clamping and positioning, widely applied in 3C automation, packaging machinery and fixtures as a cost-effective solution for space-limited equipment.
MHY2 Series 180° Angular Style Air Gripper:Cam Style
SOLH MHY2 cam-driven 180° wide swing pneumatic gripper is fully interchangeable with equivalent SMC models. It adopts cam transmission instead of gear mechanism, achieving maximum 180° opening angle with -3° over-close position to prevent workpiece loosening. Bore sizes cover 10/16/20/25 mm, purely double acting without single acting NO/NC variants, and repeat positioning accuracy reaches ±0.02 mm. Optimized narrow clearance construction enhances dust resistance. Four-side sensor grooves are available, and through-hole mounting is optional. Built-in magnetic rings work with M9 series reed switches to send open/closed feedback signals to PLC. Due to lever transmission, effective clamping force declines sharply with extended jaw overhang; torque verification is required during selection, and clamping arm length is recommended within 35 mm. Ideal for picking and flipping large-diameter tubular and irregular workpieces at miniature robot end effectors. MHW2 gear swing gripper is recommended if power-off holding or larger heavy-duty bore is required; MHZ2 parallel gripper is preferred for centered linear clamping.
GN22-12 Three-phase Isolating Switch 6300A High Current Indoor High Voltage
The GN22-12 (C) (D)series indoor high-voltage disconnecting switch is designed for power systems with a rated voltage of 12kV and a frequency of 50Hz. This device is mainly used for opening and closing circuits in the power system under no-load conditions. With high current withstand capabilities, it is ideal for applications requiring high security and frequent operations. The device can be configured to meet various environmental needs. This product is a high-current isolating switch with a three-phase common bottom knife structure. It adopts a mechanical locking prototype with a two-step action of closing and contacting, achieving wear-free contact, small operating force, high contact pressure, and good dynamic thermal stability.
3F / 3FM Series Foot Pedal Valve | 3/2 Way
SOLH 3F pneumatic foot pedal valves, consisting of heavy-duty die-cast aluminum 3F and lightweight plastic 3FM versions for direct replacement of AirTAC counterparts. Supported by self-developed precision sealing technology and automated mass production, sufficient spot stocks are kept with large annual shipments. Equipped with self-reset & locking modes and IP54 protection, they serve fixture clamping, single-acting cylinders and vacuum breaking, stably supplied to machining and automation clients, wear-resistant for high-frequency workshop operation under lube-free compressed air.