Products

SOLH 2S series 2/2-way normally closed fluid solenoid valves include two full lines: direct-acting small orifice 030/050 models and pilot-operated large bore 150~500 variants, for automatic on-off control of clean water, compressed air, cutting coolant, lubricating oil and weakly corrosive liquid pipelines. The direct-acting version enables zero-pressure startup without minimum differential pressure limit, features compact size, universal mounting orientation and millisecond fast switching, ideal for low-pressure micro-flow applications such as single-point machine tool cooling, 3C micro air/water branches and mini cleaning equipment. The pilot-operated type requires a minimum 0.05MPa pressure difference for full opening, delivers ultra-large flow with low-wattage low-heat coils, suited for air compressor drain headers, main spray water lines and high-flow circulating water treatment pipelines. Standard NBR nitrile rubber seals are equipped, with optional acid & hot water resistant EPDM food-grade seals. Multi international thread standards (PT/G/NPT) and global universal coil voltages (DC12/24V, AC24/110/220V) are available, supported by DIN plug and wire lead wiring options. Heat-resistant coils allow long-term continuous energization. Selection guide: direct-acting type for pipelines with static pressure below 0.05MPa and small branch flow; pilot-operated version for G1/2 and above main headers with stable high pressure & large circulation flow. EPDM seal is mandatory for hot water and food-grade fluid media.

SOLH 2W series 2/2-way normally closed fluid solenoid valve with solid brass body includes small orifice direct-acting 030/050 models and large bore pilot-operated 150~500 variants, designed for automatic on-off control of clean water, compressed air, cutting coolant, lubricating oil and weakly corrosive fluid pipelines. The direct-acting version realizes zero differential pressure startup with no minimum working pressure limit, features compact size, universal mounting orientation and millisecond high-frequency switching, ideal for low-pressure micro-flow branches, vacuum auxiliary water circuits and single-point cooling for small machine tools. The pilot-operated type requires a minimum 0.05MPa startup differential pressure, delivers ultra-large flow with low-power low-temperature-rise coils, suited for air compressor main drain lines, general assembly main spray water circuits and high-flow circulating pipelines for water treatment systems. Standard NBR nitrile rubber seals are equipped, with optional heat & acid resistant EPDM food-grade seals. Multiple international thread standards (PT/G/NPT) and full-range coil voltages (DC12/24V, AC24/110/220V) are available, supported by DIN plug sockets for cabinet wiring and IP65 waterproof wire leads for humid outdoor equipment. Heat-resistant coils allow 24-hour continuous energization without burnout. Selection guidelines: choose direct-acting type for pipelines with static pressure below 0.05MPa and micro single-point flow; select pilot-operated variant for G1/2 and above main headers with stable high-pressure large circulation. EPDM seal is mandatory for hot water, purified water and food-grade fluid media.

SOLH HLH ultra-thin side L rail linear slide cylinder adopts integrated single-side recirculating ball guide rail with slim low-profile body to save installation space, a double-acting pneumatic slide dedicated to light-load precision positioning. Bore sizes range from 6, 10, 16 to 20 mm with standard strokes of 5–60 mm, operating pressure 0.15~0.7 MPa and working temperature from -20℃ to 70℃. The cylinder body features 4-direction mounting tapped holes and 3-side air ports for flexible piping layout. The slide carriage is equipped with fixture tapped holes and positioning pin holes on top and front surfaces. A built-in magnetic ring comes as standard, with dual side slots for mounting magnetic reed switches. The floating joint between piston rod and carriage eliminates lateral side load and ensures excellent straightness & anti-rotation precision. Compared with twin-rail HLQ series, HLH features slimmer outline for confined narrow space, widely applied in 3C & semiconductor mini inspection jigs, light-duty push-clamping units and reciprocating positioning mechanisms inside compact automation machinery.

SOLH HLQ / HLQL twin-shaft slide cylinders adopt recirculating ball linear guides, including HLQ compact standard version with side-mounted cylinder and ultra-rigid symmetrical HLQL model. Bore sizes range from 6 to 25 mm with strokes 10–150 mm. The twin parallel piston rod design delivers strong thrust and excellent anti-torsion & anti-rotation performance. A built-in floating joint between piston and slide carriage offsets eccentric lateral loads. The base features 3-direction mounting tapped holes, while the slide carriage provides multi-surface fixture mounting holes and positioning pins; side slots for magnetic reed switches and built-in magnet come as standard. Multiple buffer options are available: double / single adjustable air buffer, hydraulic shock absorber and external stop blocks for smooth reciprocation and high repeat positioning accuracy. HLQ fits medium-small loads with limited space, while symmetrical HLQL handles heavy loads and severe eccentric offset. Widely used for automatic transfer, precision clamping and linear positioning in 3C, semiconductor assembly and testing equipment.

SOLH HLS / HLSL twin-shaft slide cylinders adopt line-contact cross roller guides, delivering much higher rigidity, repeat positioning accuracy and eccentric load resistance than HLQ ball guide models. Two variants are available: standard HLS with side-mounted compact cylinder for medium-small loads without severe offset; symmetrical HLSL with centered cylinder and dual parallel rollers for heavy loads, large eccentric torque and ultra-precision demands. Bore sizes cover 6–25 mm and strokes 10–150 mm. Twin piston rods provide powerful thrust and anti-torsion performance, while built-in floating joints eliminate lateral deflection stress. The base supports 3-direction mounting holes, the slide carriage reserves multi-surface fixture threads & positioning pins, and magnetic ring plus sensor slots come as standard. Adjustable air buffers, hydraulic shock absorbers and external mechanical stops are optional accessories. Operating temperature ranges from -20℃ to 70℃. Widely used in semiconductor, medical automation, machine tool jigs and other heavy-duty ultra-precision transfer & clamping positioning stations.

SOLH MSQ rack-and-pinion rotary actuator is fully interchangeable with equivalent SMC rotary tables. Driven by symmetrical dual piston gear rack structure, it generates 3~4 times higher torque and superior radial & axial load capacity versus vane-type CRQ cylinders. Two grades are available: MSQB standard series with H9 tolerance and MSQA high-precision series featuring H8 fit and ±0.01mm repeat positioning accuracy. The rotary table is pre-machined with locating pin holes and fixture tapping holes, plus a central hollow through hole for wiring & tubing routing. Equipped with dual-end angle adjustment screws for infinitely adjustable swing range 0~190°, fixed 90°/180° swing variants are optional. Two damping solutions are offered: standard rubber bumpers and suffix-R integrated hydraulic shock absorbers (L low kinetic energy / H high kinetic energy). Dual piping layouts include default end-face ports and E side front ports. Built-in magnetic rings support M9BW reed switches to transmit position feedback signals to PLC. Frame sizes range from 10 to 200, pre-filled with long-life grease for lubrication-free operation. Widely applied to PCB optical inspection, microchip precision positioning, packaging direction switching, machine tool workpiece flipping and mini manipulator end rotary joints for indexing, turnover and multi-angle positioning automation.

SOLH HRQ dual piston rack & pinion rotary cylinder includes micro sizes HRQ2/3/7 and medium-to-large HRQ10~HRQ200 with infinitely adjustable swing angle 0~190°. It outputs higher torque and stronger bending/radial load capacity than vane rotary actuators. Three configurations are available: basic mechanical stop buffer (low-cost for light low-speed duty), -A integrated hydraulic shock absorber (high-speed heavy load precise stopping), and -A(S) hydraulic version with stainless steel end caps for humid & slightly corrosive environments. The rotary table features central hollow through hole for tubing and wiring, and side sensor slots compatible with universal magnetic reed switches. Micro models adopt bottom mounting holes while medium/large sizes provide multi-side mounting taps for flexible layout. Pre-filled long-life grease enables lubrication-free operation. Selection requires simultaneous verification of torque, radial/axial load and bending moment. Widely used for rotary indexing in automatic assembly, material sorting, packaging capping and jig turnover stations.

SOLH CRB1 / CRB2 vane-type rotary actuators are fully interchangeable with equivalent SMC swing cylinders. Direct vane drive eliminates gear backlash, delivering low rotary inertia and ultra-fast response. CRB2 is the compact light-duty range with bore sizes 10~40 mm; single vane supports up to 270° swing while double vane limits rotation to 90°/100°, ideal for high-speed mini flipping in confined-space 3C and packaging equipment. CRB1 heavy-duty series covers 50~100 mm bores with full bearing support and outstanding impact resistance, providing maximum torque up to 24 N·m for heavy fixture and large workpiece indexing turnover. Single vane offers wide swing range, whereas double vane doubles torque at the same bore size. Built-in rubber bumpers come standard; angle adjuster suffix Z and hollow shaft are optional, and CDRB variants integrate permanent magnets compatible with D-M9B / D-A93 reed switches. Compared with MSQ rack-and-pinion rotary tables, vane-type cylinders feature slimmer body and faster rotation with zero backlash yet weaker radial & axial load capacity, making them the top choice for high-speed light-load rotary tasks requiring large swing angles.

SOLH CRBU2 ultra-thin free-mount vane rotary actuator is fully interchangeable with equivalent SMC models, available in bore sizes 10/15/20/30/40. Integrated cylindrical body enables bracket-free multi-directional fixing, 12% lighter than CRB2 series, perfect for concealed installation inside compact integrated machinery. Direct vane drive eliminates gear backlash with ultra-high angular repeatability of ±0.01°. Two vane variants: S single vane for max 270° swing, D double vane delivering double torque with limited 90°/100° rotation. Dual piping layouts are offered: standard side ports and suffix-E central axial ports. Optional suffix-W angle adjuster realizes infinitely adjustable stroke from 0 to 240°, and built-in magnetic rings support M9BW reed switches for PLC limit feedback. Low-friction composite sealing ensures oil-free operation with over 5 million service cycles. Widely applied to light-load high-frequency precision rotation tasks including 3C miniature jig turnover, vision camera positioning, screw tightening mechanisms and small-angle packaging switching. Compared with base-mounted CRB2 rotary cylinders, CRBU2 requires no mounting brackets and maximizes space efficiency, ideal for robot end effectors and narrow internal equipment layouts.